Owner’s Manual8- and 16-Port NetCommander™ Cat5 Rackmount KVM SwitchesModels: B072-008-1 and B072-016-1Note: Follow these installation and operating
10106.3 On-Screen Display (OSD) F2 SETTINGS (continued)Hotkey By default, the hotkey used in keyboard hotkey commands and to open the OSD is the [Shif
11116.3 On-Screen Display (OSD) F2 SETTINGS (continued)6.3.2 Ports6.3.3 TimeHighlight the Ports option and press the [Enter] key to open the Port Sett
12126.3 On-Screen Display (OSD) F2 SETTINGS (continued)6.3.4 Users6.3.5 SecurityThe Users option can only be accessed when Security is enabled in the
13• FirmwareUpgradeUtility—ThisWindows-basedapplicationreadsthecurrentfirmwareandinstalls the new firmware of the KVM and Server Interface
14147.5 Current Firmware Verification (continued)3. When installation is complete, clicking the Finish buttonwillautomaticallyopentheFirmwareUpgr
157.5 Current Firmware Verification (continued)5. Uncheck the NetCommander CAT5 KVM Switch OSD box, and check the box next to NetCommander CAT5 KVM Swi
167.6 Firmware UpgradeOnce you have determined that your KVM and/or SIU(s) need to be upgraded, follow the steps below to install the new firmware.1.I
17Warning: Disconnect device from AC mains before service operation!WhenusingFirmwareUpdatesoftware,youmaygetaCommunicationErrormessage.If
1818This equipment has been tested and found to comply with the limits for a Class A digital device, pursuanttoPart15oftheFCCRules.Theselimit
1919Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawi
1. Features 32. System Components 33. Compatibility 34. Configuration 44.1 Front Panel 44.2 Back Panel 45. Installation 45.1 Rackmount Con
14-03-231•93-3350_revA201111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support14-03-231-933350.indd 20 3/27/2014 4:38:39 PM
3• Access and control multiple computers from a single console• Hot-swappable: disconnect and reconnect USB computers without rebooting• Auto-scan:
44. Configuration4.1 Front PanelFigure 4.1 B072-016-1 NetCommander KVM front panel1 Port Select Buttons: Press these buttons to toggle back and fort
55.2 Rackmounting the NetCommander KVMUse the L-shaped brackets and screws provided to mount the KVM in a server rack as illustrated below.Figure 5.2
65. Installation (continued)Figure 5.5.1 NetCommander PS/2 Server Interface UnitSIU = Server Interface Unit5.5.1 PS/2 Server Interface UnitConnecting
775. Installation (continued)To reset the KVM switch, press both "Select" buttons on the front panel simultaneously. The Server Interface Un
886. Operation6.1 Basic Operation6.2 On-Screen Display (OSD) FunctionsThe NetCommander KVM Switch provides three methods for accessing connected compu
96.3 On-Screen Display (OSD) F2 SETTINGS96. Operation (continued)6.3.1 GeneralF5 – TUNING As computers are located further away from the KVM switch, t
Commentaires sur ces manuels