Tripp Lite B021-000-19 Manuel d'utilisateur télécharger pdf (Page 7)

The B021-000-19 can be mounted in a 1U

system rack. For convenience and flexibility,

mounting hardware is provided with your

B021-000-19 package. The various options are

explained in the sections that follow.

Standard Rackmounting

The standard rackmounting brackets that come

with the B021-000-19 allow the unit to be

installed in standard 1U racks. If the unit can fit

into your rack “as is,” simply slide it into the rack

and screw it securely in place.

Rackmounting

Optional Rackmounting

If there is not enough clearance for the unit to

slide into the rack when the rear flanges face

outward, the problem can be resolved with the

following procedure:

1. Locate the two included mounting brackets.

2. Turn the brackets so that the flanges face

inward; then screw them back into the chassis.

Note: Be sure to leave a 13mm gap between

the flange and the rear of the chassis in order

to have enough room to screw the tab to the

flange (referred to in step 4).

3. Slide the unit into the rack.

4. Screw the metal tabs to the rear flanges.

5. Secure the unit to the rack with the front

flanges and rear tabs.

Steps 1-3

Steps 4-5

The B021-000-19 can also be mounted in a 2-

post rack installation using the optional 2-Post

Rackmount Kit (model #: B019-000). The

mounting hardware allows for the consoles to be

opened with the drawer in any position. Heavy-

duty 14-gauge steel provides stability and

prevents console frame from twisting.

200708132 Owner’s Manual 93-2682 B021-000-19 Rackmount Console.qxd 9/7/2007 11:45 AM Page 7

1 2 3 4 5 6 7 8

Pas de commentaire

Tripp Lite B021-000-19 Manuel d'utilisateur Page 7