Tripp-lite I Manuel d'utilisateur télécharger pdf (Page 3)

Quick Installation

Plug your UPS into an

electrical outlet.

Plug your computer,

monitor and external

modem into battery-

supported outlets.

Plug other equipment

into surge-only outlets

of your UPS.*

Optional (All models)**

Using telephone cords, connect your

wall jack to the UPS jack marked

“LINE” (or “IN”). Connect your

equipment to UPS jack marked

“EQUIP” (or “OUT”).

Optional (Select models)**

Using Tripp Lite cable (if supplied),

connect the DB9 port of your

computer to the DB9 port of your

UPS. Load software (if supplied) and

run installation program appropriate

to your operating system.

Turn your UPS's power

switch ON.

* Identified on the back of your UPS. Your UPS is designed to support only computer equipment. You will overload your

UPS if you connect household appliances, laser printers or surge suppressors to the battery-supported outlets. **Phone line

and DB9 port connections are optional. Your UPS will function properly without these connections. Make sure the equipment

you connect to the UPS’s telephone jacks is also protected against damaging surges on the AC line.

9811193 Internet Office Owner's Manual.p65 8/10/99, 11:59 AM3

1 2 3 4 5 6 7 8 ... 19 20

Pas de commentaire

Tripp-lite I Manuel d'utilisateur Page 3