Tripp Lite VR1208R Manuel du propriétaire
Naviguer en ligne ou télécharger Manuel du propriétaire pour Régulateurs de tension Tripp Lite VR1208R. Tripp Lite 1200VA Voltage Regulator - Automatic voltage regulation with surge protection Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Owner’s Manual
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
Important Safety Instructions Warranty Information
Installation
Fax/Modem Protection
Indicator Lights
Copyright © 2012 Tripp Lite. All rights reserved.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Voltage Regulator
• Install your voltage regulator indoors, away from excess moisture and
heat, direct sunlight, and dust and other conductive contaminants.
• For best performance, keep the indoor temperature between 0º
C and 40º C (between 32º F and 104º F ).
• Leave adequate space around all sides of the voltage regulator
for proper ventilation.
• Connect your voltage regulator directly to a three-wire, grounded
AC power outlet. Do not remove or modify the ground pin of the
voltage regulator’s plug. Do not use adapters that would eliminate
the voltage regulator’s connection to ground.
• Do not use extension cords between the voltage regulator and
the AC outlet. If necessary, a Tripp Lite Surge Suppressor may be
used between the voltage regulator and the AC outlet.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness
is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
TRIPP LITE warrants its products to be free from defects in materials and workmanship
for a period of two years from the date of initial purchase. TRIPP LITE’s obligation under
this warranty is limited to repairing or replacing (at its sole option) any such defective
products. This warranty does not apply to equipment which has been damaged by
accident, negligence or misapplication or has been altered or modified in any way. This
warranty applies only to the original purchaser who must have properly registered the
product within 10 days of purchase.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue,
loss of equipment, loss of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite
product.You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website
for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite
product has been assigned a unique series number. The series number can be found on
the product nameplate label, along with all required approval markings and information.
When requesting compliance information for this product, always refer to the series
number. The series number should not be confused with the marking name or model
number of the product.
FCC Part 68 Notice (United States Only)
If your Modem/Fax Protection causes harm to the telephone network, the telephone
company may temporarily discontinue your service. If possible, they will notify you in
advance. If advance notice isn’t practical, you will be notified as soon as possible. You
will be advised of your right to file a complaint with the FCC. Your telephone company
may make changes in its facilities, equipment, operations or procedures that could
affect the proper operation of your equipment. If it does, you will be given advance
notice to give you an opportunity to maintain uninterrupted service. If you experience
trouble with this equipment’s Modem/Fax Protection, please visit www.tripplite.com/
support for repair/warranty information. The telephone company may ask you to
disconnect this equipment from the network until the problem has been corrected or
you are sure the equipment is not malfunctioning. There are no repairs that can be
made by the customer to the Modem/Fax Protection. This equipment may not be used
on coin service provided by the telephone company. Connection to party lines is subject
to state tariffs. (Contact your state public utility commission or corporation commission
for information.)
Tripp Lite follows a policy of continuous improvement. Product specifications are
subject to change without notice.
1
Connect your voltage regulator to an electrical outlet.
2
Plug your computer and electronics into your voltage regulator’s
outlets. NOTE: Four outlets feature Automatic Voltage Regulation
(AVR) only and four outlets feature surge suppression only.
Connect your computer and electronics accordingly.
3
Turn your voltage regulator’s power switch on.
NOTE: This connection is optional. Your voltage regulator will
work properly without this connection. Using telephone cords,
connect your wall jack to the voltage regulator jack marked “IN” and
your equipment to the voltage regulator jack marked “OUT”.
BOOST: This yellow light will turn ON whenever your voltage regulator
is boosting low AC line voltage up to nominal voltage levels.
POWER: This green light will turn ON whenever your voltage
regulator is receiving normal AC line voltage.
CUT: This red light will turn ON whenever your voltage regulator is
reducing high AC line voltage down to nominal voltage levels.
201206047 • 933175-EN
USB Charger (VR1208USB Only)
Features two USB Charger ports. Rated 5 VDC, 0.7A max.
For proper USB charger operation, only connect USB device(s)
after regulator is turned ON and start-up cycle is complete.
Models:
VR1208R and VR1208G
(120V, 60Hz Input, Output)
VR1208USB
(120V, 60Hz Input, Output)
with USB Charger Ports
VR2008R
(120V, 60Hz Input, Output)
201206047 933175.indd 1 6/12/2012 4:08:39 PM
1
2
Résumé du contenu
Page 1 - Owner’s Manual
Owner’s ManualWarranty Registration: register online today for a chance to win a FREE Tripp Lite product—www.tripplite.com/warrantyImportant Safety
Page 2 - Manual del propietario
Manual del propietarioInstrucciones de Seguridad ImportantesInformación de GarantíaInstalaciónProtección de Fax/MódemLuces IndicadorasRegulador de V
Plus de documents pour Régulateurs de tension Tripp Lite VR1208R
Tripp Lite VR1208R Manuel d'utilisateur
(2 pages)
Produits connexes et manuels pour Régulateurs de tension Tripp Lite VR1208R
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.116 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels