Tripp Lite B020-008-17 Manuel d'utilisateur télécharger pdf (Page 13)

Setting the Scan Interval

The amount of time the KVM remains on each port during Auto Scan is set using the Scan Duration setting

of the OSD’s F3 SET function (see page 17). The scan interval can be changed prior to activating Hotkey

Auto Scanning by performing the following:

1) Invoke Hotkey Mode with the [NumLock] + [-] combination

2) Key in [T] [n]

[T] is the letter T, and [n] is a number from 1-255 that represents the number of seconds for the dwell

time. The letter T and the numbers display on the Command Line as you key them in. To correct a

mistake, use [Backspace] to erase the wrong number.

3) Press [Enter]

After you press [Enter], you automatically exit Hotkey Mode and are ready to invoke Auto Scanning.

Starting Auto Scan

To start Auto Scanning, enter the following Hotkey combination:

1) Invoke Hotkey Mode with the [NumLock] + [-] combination

2) Key in [A]. After you press A, you automatically exit Hotkey Mode and enter Auto Scan Mode.

3) An autoscan can be paused at any time (see below).

4) To exit Auto Scan Mode, press [Esc] or [Spacebar].

Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended - only Auto Scan Mode compliant key-

strokes and mouse clicks can be input. You must exit Auto Scan Mode in order to regain normal control of the console.

Pausing in Auto Scan

While in Auto Scan Mode, the scan can be paused in order to keep the focus on a particular computer either

by pressing P or with a Left Click of the mouse. During the time that Auto Scanning is paused, the

Command Line displays: Auto Scan: Paused.

In many cases Pausing is more convenient than Exiting the Auto Scan Mode because when you Resume

scanning while in Pause, you start from where you left off. If you Exited and restarted, scanning would

start from the very first computer on the installation.

To resume Auto Scanning, press any key or left click. Scanning continues from where it left off.

200603055 93-2469 KVM Switch Update.qxd 3/16/2006 1:08 PM Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Pas de commentaire

Tripp Lite B020-008-17 Manuel d'utilisateur Page 13