Tripp Lite B060-016-2 Manuel d'utilisateur télécharger pdf (Page 17)

Installation

(continued)

Topology Considerations

The use of RJ-45 CPU connectors, combined with our Auto Signal Compensation (ASC), allow signals to

travel up to 500 feet (150 meters) and still maintain reliability and high video resolution. This allows the

B060 Series KVM installation to take advantage of the internal Cat5e and Cat6 wiring built in to most

modern commercial buildings.

Note: Although the B060 Series KVM supports legacy CAT5 wiring, the performance and video quality

may degrade over longer distances.

Since the data signals are not transmitted in packets, the transmission cannot go through network hubs or

switches. Passive components such as patch panels, keystone jacks, patch cables, etc. can be used to

channel the traffic.

Basic Operations

Hot Plugging

The B060 Series KVM supports hot plugging—components can be removed and added back into the installa-

tion by unplugging their cables from the ports without the need to shut the unit down. In order for hot

plugging to work properly, however, the procedures described below must be followed:

Switching Station Positions: On daisy chained installations, you can switch station positions by simply

unplugging from the old parent and plugging into a new one.

Hot Plugging Console Ports: Keyboard, monitor, and mouse can all be hot plugged. If you experience a

problem after you plug in a new mouse, do a system reset by pressing the reset switch on the B060

Series KVM’s front panel (see p. 4 for details). If this doesn't resolve the problem, restart the computers

that have the problem.

Powering Off and Restarting

Powering off the B060 Series KVM does not affect the computers attached to it. When you restart the

B060 Series KVM, you will regain control immediately. To replace a B060 Series KVM, simply power it

down; unplug the cables; plug them into the new unit; and power the new unit on.

Note: If any of the computers behave strangely after powering off and restarting, or changing a switch,

simply restart the computer.

Port Selection

Port Selection is accomplished either by entering Hotkey combinations from the keyboard, or by means of

the B060 Series KVM’s OSD (On Screen Display). OSD Operation is discussed in detail in the next chap-

ter; Hotkey Port Selection is discussed on p. 27.

Although hotkeys are handy for a single stage installation, we strongly recommend you use the more

powerful and versatile OSD - especially for daisy chained, cascaded, and combined installations.

Port ID Numbering

Each CPU port on a B060 Series KVM installation is assigned a unique Port ID. You can access and control

any computer on the installation by specifying the Port ID of the port that it is connected to. Depending on

where the computer is on the installation, its Port ID will either have two or three parts.

Single Stage and Daisy Chained Installations

For single stage and daisy-chained installations, the Port ID is made up of two parts: a Station Number and

a Port Number:

• The Station Number - is a two digit number which reflects the switch’s position in the daisy chain

sequence. This corresponds to the number displayed on the front panel Station ID LED.

• The Port Number - reflects the port on the B060 Series KVM Station that the computer is connected to.

• The Station Number precedes the Port Number.

Note: Station numbers from 1 - 9 are padded with a preceding zero, so they become 01 - 09.

For example, a computer attached to Port 12 of Station 6 would have a Port ID of: 06-12.

200707049 Owners Manual 93-2707.qxd 8/2/2007 11:30 AM Page 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Tripp Lite B060-016-2 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs KVM Tripp Lite B060-016-2