Tripp Lite B060-016-2 Manuel d'utilisateur télécharger pdf (Page 26)

OSD Operation

(continued)

F8 LOUT

LOUT (Log Out) logs you out of OSD control of the computers, and blanks the Console screen. This is

different from simply pressing [Esc] to deactivate the OSD when you are at the Main Screen. With this

function you must log in all over again to regain access to the OSD, whereas with [Esc], all you have to do

to reenter the OSD is tap the OSD Hotkey.

Note: 1 When you reenter the OSD after logging out, the screen stays blank except for the OSD

Main Screen. You must input your password before you can continue.

2. If you re-enter the OSD after logging out, and immediately use [Esc] to deactivate the OSD with-

out having selected a port from the OSD menu, a Null Port message displays on the screen. The

OSD Hotkey will bring up the Main OSD Screen.

Cascaded OSD Operation

Under Protocol Interface Cascading (see p. 12), the OSDs of the cascaded switches are all seamlessly

integrated into the B060 Series KVM's OSD so that all ports can be accessed from there.

Under Physical Interface Cascading (see p. 13), however, there are two separate OSDs: one for the

B060 Series KVM, and one for the cascaded switch.

If both the B060 Series KVM and the cascaded switch use the same OSD Hotkey ([Scroll Lock] [Scroll

Lock], for example), both OSDs show up on the console monitor when you invoke the OSD.

The B060 Series KVM’s OSD is on top, overlaying the OSD of the cascaded switch. To proceed, select the

port that the cascaded switch is connected to on the B060 Series KVM’s OSD. The B060 Series KVM's

OSD disappears, leaving the cascaded switch’s OSD for you to work with.

You can eliminate this problem by selecting the alternate OSD Hotkey ([Ctrl] [Ctrl]) for the cascaded

switch (see the switch’s User Manual for details). With this method when you press [Scroll Lock] [Scroll

Lock], only the B060 Series KVM’s OSD comes up. To proceed:

1. Select the port that the cascaded switch is connected to. The B060 Series KVM’s OSD disappears.

2.Tap [Ctrl] [Ctrl] to bring up the cascaded switch's OSD for you to work with.

OSD Functions

200707049 Owners Manual 93-2707.qxd 8/2/2007 11:30 AM Page 26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Pas de commentaire

Tripp Lite B060-016-2 Manuel d'utilisateur Page 26