Tripp Lite PowerVerter Plus DC-to-AC Inverter Manuel d'utilisateur télécharger pdf (Page 6)

Vehicular and Non-Vehicular Horizontal Mount

Using the measurements from the diagram, install two user-sup-

plied ¼" (6 mm) fasteners into a rigid horizontal surface, leaving

the heads slightly raised. Slide the Inverter/Charger back over

the fasteners to engage the mounting slots molded on the bottom of

the Inverter/Charger cabinet. Install and tighten two user-sup-

plied ¼" (6 mm) fasteners into the mounting feet molded on the

front of the Inverter/Charger cabinet.

6PV

Mounting

optional

WARNING! If you choose to mount your Inverter, mount it and wire its DC input

BEFORE DC battery connection. Failure to follow these instructions may lead to

personal injury and/or damage to the Inverter and connected systems.

Tripp Lite Inverters are designed for horizontal mounting in a variety of vehicular or non-vehicular applications. User must supply mounting

hardware and is responsible for determining if the hardware and mounting surface are suitable to support the weight of the Inverter. Contact

Tripp Lite if you require further assistance in mounting your Inverter.

7.87 in (20 cm)

6.75 in (17.1 cm)

4.5 in (11.4 cm)

1 2 3 4 5 6 7 8 9

Pas de commentaire

Tripp Lite PowerVerter Plus DC-to-AC Inverter Manuel d'utilisateur Page 6