MODEL NUMBER: PV750UL PV750FC PV1250UL PV1250FC
DC Input Volts (Nominal): 12 VDC 12 VDC 12 VDC 12 VDC
DC Input Voltage Range: 10 - 15 VDC 10 - 15 VDC 10 - 15 VDC 10 - 15 VDC
DC Input Connection: User-Supplied Cables User-Supplied Cables User-Supplied Cables User-Supplied Cables
Output Volts (Nominal): 120 VAC, ± 5% 120 VAC, ± 5% 120 VAC, ± 5% 120 VAC, ± 5%
Output Frequency (Nominal): 60 Hz, ± 0.5% 60 Hz, ± 0.5% 60 Hz, ± 0.5% 60 Hz, ± 0.5%
Output Waveform: Modified Sine Wave Modified Sine Wave Modified Sine Wave Modified Sine Wave
Efficiency: Up to 94%, depending on load Up to 94%, depending on load Up to 94%, depending on load Up to 94%, depending on load
and temperature and temperature and temperature and temperature
Continuous Power (@ 20 C): 750 W 750 W 1250 W 1250 W
OverPower™ Peak Surge Power:* 1125 W 1125 W 1875 W 1875 W
Double Boost™ Peak Surge Power:* 1500 W 1500 W 2500 W 2500 W
DC Fuse Rating (UL Recognized): 200 Amp 200 Amp 200 Amp 200 Amp
* OverPower duration (up to 1 hour). DoubleBoost duration (up to 10 seconds). Actual duration depends on battery age, battery charge level and ambient temperature.The policy of Tripp Lite is one of continuous
improvement. Specifications are subject to change without notice.
This product designed and engineered in the USA.
Wire Gauge
2 Conductors
Watts 6 4 2 0 00
500 15 ft 25 ft 39 ft 62 ft 79 ft
700 11 ft 18 ft 28 ft 44 ft 56 ft
1000 N/R 12 ft 20 ft 31 ft 39 ft
2000 N/R N/R N/R 16 ft 20 ft
2400 N/R N/R N/R 13 ft 16 ft
† N/R = Not Recommended. NOTE: Acceptable power is directly related to cable length (i.e. - the shorter the cable,
the better the performance)
Specifications
Minimum Recommended Cable Sizing Chart
†
Always loosely twist each pair of cables together before connecting them separately to
the appropriate DC terminal on the Inverter (positive or negative). Use in conjunction
with DC wiring connection instructions in the Battery Connection section.
Tripp Lite Inverters include a Battery Charge Conserver (Load Sense) Control which saves battery power by allowing users to
set the minimum load level at which the unit’s inverter turns on. Users can significantly reduce the No Load DC Input Current to
a very low amperage power level with the use of this control.
200501167 93-2427
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product
nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number
should not be confused with the marking name or model number of the product.
1111 W. 35th Street • Chicago, IL 60609 USA
Customer Support: 773.869.1234 • www.tripplite.com
* Only applies to models with “UL” in
their model numbers.
(1 pages)
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels