Tripp-lite B050-000 Manuel d'utilisateur télécharger pdf (Page 27)

Chapter 4. Conﬁguration

save the changes enter an user name and an according password. Then press the

“Setup Device” button.

Using the Linux tool

On the top of the window the MAC address of the device is displayed. To detect

the MAC address manually, press the button “Refresh”. The displayed MAC

address is the same MAC address printed on the white sticker placed on the

back of the B050-000. The Linux setup tool does currently not support device

conﬁguration via the USB interface. Please use either a network connection or

the serial console for the initial device conﬁguration.

Furthermore, there are two buttons on the window: “Query Device” and “Setup

Device”. Press the “Query Device” button to display the preconﬁgured values

of the network conﬁguration. The values are displayed in the text ﬁelds lo-

cated nearby. If necessary, adjust the network settings to your needs. To save the

changes enter an user name and an according password. Then press the “Setup

Device” button.

Authentication

To adjust the authentication settings, enter your login as a superuser and change your

password.

Super user login

Enter the login name of the super user. The initial value is “super”.

Super user password

Enter the current password for the super user. This initial value is “pass”.

New super user password

Enter the new password for the super user.

New password (conﬁrm)

Re-type the new password for the super user.

To close the window and accept the changes press the “OK” button, otherwise press

the “Cancel” button (on Windows). On a Linux system close the window by the ap-

propiate button of the window frame.

Initial Conﬁguration via DHCP Server

By default, the B050-000 will try to contact a DHCP server in the subnet to which it is

physically connected. If a DHCP server is found, it may provide a valid IP address,

gateway address and net mask. Before you connect the device to your local subnet,

be sure to complete the corresponding conﬁguration of your DHCP server. It is rec-

ommended to conﬁgure a ﬁxed IP assignment to the MAC address of the B050-000.

You can ﬁnd the MAC address on the outside of the shipping box and labeled on the

bottom side.

If this initial conﬁguration does not meet your local requirements, use the setup tool

to adjust the values to your needs. The setup tool can be found on the CD ROM

delivered with this package. You can follow the procedure described below.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 125 126

Pas de commentaire

Tripp-lite B050-000 Manuel d'utilisateur Page 27