Tripp-lite B050-000 Manuel d'utilisateur télécharger pdf (Page 89)

Chapter 6. Menu Options

Passthrough access to serial port via Telnet/SSH

Using this option it is possible to connect an arbitrary device to the serial port

and access it (assuming it provides terminal support) via Telnet or SSH. Select

the appropriate options for the serial port and use the Telnet Console or a stan-

dard Telnet/SSH client to connect to the B050-000. For more information about

the Telnet interface you may have a look at the Section called Telnet Console.

IPM 220-L (Inline Power Module)

This is an optionally available external module to switch power of a single sys-

tem by putting it in the power supply line of the controlled system.

Intelligent Platform Management Interface (IPMI)

Figure 6-33. IPMI

Generals

By using the B050-000 IPMI facilities you have an additional way to power on or

off the system or to perform a hard reset. Furthermore, it provides the possibility

to show an event log of the host system and the status of some system sensors (i.e.

temperature). If your host system supports IPMI, you can access it by one of the

following ways:

• IPMI over LAN (IPMI V1.5 is required)

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 125 126

Pas de commentaire

Tripp-lite B050-000 Manuel d'utilisateur Page 89