Tripp-lite B050-000 Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 1. The Quick Start Guide

Rear Side Connectors (Figure 1-3)

Figure 1-3. Rear Side Connectors

Port replicator

Here you may attach an optional port replicator enabling PS/2 support, serial

and local console.

Connecting the B050-000 to the Host System

Perform the following steps in order to connect the KVM signals of the server system

to the B050-000:

1. Attach the pre-mounted system cable to

• The VGA outlet of your server or the local console video port of your KVM

switch. Use the system cables’s blue connector that is still unused.

• The USB to one of the USB interfaces of your server or your USB-KVM

switch.

2. Connect the RJ45 Ethernet connector to your local Ethernet hub using a CAT5

cable.

3. Connect the external power supply to the 5V power connector and power on

the B050-000.

Warning

The USB standard guarantees up to 500mA power per single USB port.

The B050-000 needs up to 700mA current and therefore does not work

on USB alone. However, most of the current USB ports provide more

than 700mA so that no external power is needed to power the B050-

000. Taking more power from a USB port than speciﬁed may cause

damage to your computer and is therefore not recommended.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 125 126

Pas de commentaire

Tripp-lite B050-000 Manuel d'utilisateur Page 11