Tripp-lite B050-000 Manuel d'utilisateur télécharger pdf (Page 26)

Chapter 4. Conﬁguration

Figure 4-2. B050-000 setup tool (Linux version)

Connect the B050-000 to your computer either via local network or via USB. Start

the setup tool from the CD ROM on the computer where the B050-000 is installed.

Depending on the connection (USB or network), the device detection is different.

Note: Conﬁguration via network requires the device to have a valid IP address. If your net-

work provides a properly conﬁgured DHCP server the B050-000 should be automatically

assigned an IP address.

A window opens as seen in Figure 4-1 (on a Windows OS) and Figure 4-2 (on a Linux

OS).

MAC Address Detection

Using the tool for Windows

On the upper left corner, the MAC address of the B050-000 is displayed. To detect

the MAC address manually, press the button “Refresh Devices”. The displayed

MAC address is the same MAC address printed on the white sticker placed on

the back of the B050-000. If the B050-000 is connected via USB, it is classiﬁed as

a USB device and an appropriate drive letter is chosen for this device.

On the lower right corner of the window, there are two buttons: “Query Device”

and “Setup Device”. Press the “Query Device” button to display the preconﬁg-

ured values of the network conﬁguration. The values are displayed in the text

ﬁelds located above. If necessary, adjust the network settings to your needs. To

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 125 126

Pas de commentaire

Tripp-lite B050-000 Manuel d'utilisateur Page 26